Deck permits in the City of Oshkosh
Start at Planning Services when filing in person, or upload your site plan and deck drawings in OpenGov.
Official sources checked
On this page
Where to submit and what to include
Where to file
City Inspection Services
Apply online in OpenGovBring a scaled site plan to Planning Services in City Hall, Room 204, before filing in person with Inspection Services in Room 205. To file online, upload the site plan and deck drawings in OpenGov.
For the online route, confirm whether separate site plan approval applies. Call Planning Services
What to include
- Scaled site plan for Planning Services.
- Description of the work, deck framing plans, and the deck details page in the city’s handout.
- Show footing locations and size, ledger attachment, connections, guards, and lateral support.
Do I need a permit?
The city lists decks, stairs and porches as work that may require a permit. Check repair and replacement scope with Inspection Services.
Building permit fee
Confirm with the building office.
Deck code and local rules
Code to draw to
Wisconsin UDC SPS 321.225 covers decks attached to dwellings and detached decks serving an exit. Use SPS 321 or its applicable Appendix B and C details. DSPS also recognizes AWC DCA 6 based on the 2012 IRC as a design option.
Wisconsin deck code · Wisconsin span charts · Deck design options explained by Sun Prairie
The city deck handout uses Wisconsin UDC Appendix B and C and calls for an engineered design when needed.
Local rules and footing depth
- The city handout calls for concealed fasteners on posts, rails and balusters of decks or porches visible from the street.
Under Wisconsin Appendix B, place the footing bottom at least 48 inches below finished grade or below frost penetration, whichever is deeper. Appendix B footing rule (PDF)
Use City Planning Services for zoning and site plan review. Oshkosh Planning Services deck guidance
What to show on the drawings
The city’s deck instructions call for lateral support, the ledger connection, and how the footing, post, beam, and joists connect. Show those connections on the drawings instead of relying on the plan view alone.